Firmware Update Guide

To ensure optimal performance and security, please follow the standard UF2 Bootloader process to update your Elytra keyboard

1. Reset Connectivity: Clear the existing Bluetooth pairing history from your host devices to ensure a clean handshake with the new firmware.
2. Locate the reset button on the bottom of your keyboard. There's one button on each side, positioned along the keyboard's edge.
   
3. Connect a USB cable to the Right Hand (Peripheral), then double-click the reset button. A USB drive named "Elytra" will appear on your computer.
4. Firmware Transfer: Copy the peripheral.uf2 file into the "Elytra" drive. Make sure you're using the correct firmware for each side.
   • Technical Note for macOS: Due to the automatic reboot cycle of the UF2 protocol, macOS may display a "Disk Not Ejected Properly" notification (Error -36). This is a standard system response to the device’s self-reboot and indicates a successful transfer.
5. Repeat steps 3-4 for the Left Hand (Central), this time using the central firmware file.
6. All done! Your keyboard is now running the latest firmware

Firmware Releases

V1.1

Changelog

• Fixed: General stability issues.
• Improved: The BLE connection now remains active when plugging in a USB cable, enabling seamless switching between USB and BLE devices.

Download

• Elytra Firmware v1.1
• Checksum: sha256:9d05d1cd231dc23ca9c922d49ed099286e2d466239fc16cff11696034b308b95

V1.0

Factory Firmware

Download

• Elytra Firmware v1.0
• Checksum: sha256:3d2599f8e1f4ad88a4305ebc5ac4798dd42ad7e7276538defae60f1af8878be9